Battery rivet gun Gesipa ACCUBIRD (Ø 2.4-5.0 + 6.3)

Battery rivet gun Gesipa ACCUBIRD for blind rivets Ø 2.4-5.0 mm (all materi..

39,000.00 грн. 57,746.00 грн.

Charging station for GOEBEL Li-Ion 14.4 V batteries

Charging station for GOEBEL Li-Ion 14.4 V batteries. Position No. 5 according to the ..

1,279.20 грн. 1,560.00 грн.

Drawer hinges MV-07 (galvanized steel)

Drawer hinges 102 x 45 mm. Standard hinges for fastening lids or walls of v..

25.49 грн. 32.24 грн.

Electromagnetic sheet bending machine Magnabend 1250 E

The model Magnabend 1250 E has a bending beam length of 1250 mm and a ..

171,600.00 грн. 181,220.00 грн.

Latch galvanized 2/50 GOEBEL

Засувка / Затискач - 2/50, розмір замку 96 х 38 мм, матеріал: оцинкована, ..

67.60 грн. 79.19 грн.

Battery rivet gun Gesipa FIREBIRD PRO CAS (M4-M10)

Provider: Gesipa (Німеччина)
Product Code: 1679668
Availability: Pre-Order

Available Options

Equipment options - Gesipa FIREBIRD PRO CAS

from 107,730.48 грн.

(including Tax грн.)

Minimal order is 400 UAH

Please fill in the fields :

0 reviews / Write a review

Operating range	aluminum - up to M10, steel - up to M8, stainless steel - up to M6
Tractive effort	15 000 N
Stroke	10 mm
Drive unit	Brushless DC motor
Battery	18,0 V
Weight	2,4 kg

Battery rivet gun Gesipa FIREBIRD PRO CAS for rivet nuts M4-M10;

This is a new generation riveter from GESIPA. Equipped with a BLDC motor — brushless DC motor that, instead of brushes that are susceptible to wear, uses electrical sensors to detect the rotor‘s position and commutate the stator coil via circuit breakers. A special software in the electronics controls the motor. The advantages of a BLDC motor include high efficiecy, long service life, particularly smooth running with a precision ball bearing and a reduction in electrical noise radiation. And additional auto reverse feature also reduces the draw process, ensuring that instrument is ready for use immediately after the rivet is installed.

Other advantages of the new generation:

Lighting:
The light-emitting diodes precisely aligned to the work piece are integrated into the adjusting ring. There are three possible switch positions:
• Process-controlled: The diodes remain illuminated after the setting process, which allows a continuous workflow even in bad lighting conditions;
• Torch function: Steady glow of diode (max.10 minutes);
• Lighting off: saves electricity.

Digital LED electronic control panel:
• Split LED input field;
• Switches to energy-saving mode after 15 seconds;
• Plastic cover to avoid damage and inadvertently changing the setting;
• Presetting in steps of 10 and fine adjustment with 99 individual settings;
• 10 freely selectable program memories;
• the most simple setting of the tool for different types or thickness of material, as well as for different types of rivets;

Threaded mandrel:
• Mandrel quick-change system;
• Nosepiece and mandrel module taken from FireFox®;

Threaded mandrel magazine:
• Storage of mandrels in the practical, screw-on mandrel magazine;
• Three mandrels and matching nosepieces included in scope of delivery;

Li-Ion battery 18V:
• Ultra M technology: Intelligent battery management for long-lasting battery packs
• Patented “AIR COOLED“ charging technology
• Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
• Processor-controlled charge and discharge management
• Capacity display with almost no self-discharge
• One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners

The tool comes in carton box, complete with complete with 3 nozzles (M4, M5, M6), wrenches for tool maintenance, instruction.
Option:
- CAS Multi-Charger for CAS 18 V batteries;
- battery CAS 18V / 2.0 Ah;
- branded plastic case L-BOXX;

Operating range:
FireBird PRO CAS works with aluminum threaded rivets up to M10, steel up to M8, stainless steel up to M6.

Supplier: Germany

Manufacturer: Germany

GESIPA