Electromagnetic sheet bending machine Magnabend 2000 E

Provider: MAGNABEND™ (Австралія)
Product Code: 2000 E
Availability: Pre-Order

Available Options

Magnabend type:

from 324,220.00 грн.

(including Tax грн.)

Minimal order is 400 UAH

Please fill in the fields :

0 reviews / Write a review

Bending length, mm	2000
Sheet thickness, steel (σв < 320 MPa), mm	1,6
Sheet thickness, aluminum (σв < 320 MPa), mm	1,6
Sheet thickness, stainless steel (σв < 320 MPa), mm	1,0
Minimum height of U-profile, mm	19
Minimum dimensions of closed profile, mm	114 x 22
Minimum height of Z-profile (with trim removed), mm	35 x 18
Standard beam clamping force, tons	9
Table height, mm	900
Back rest, mm	640
Foot switch	yes
AC voltage, V	220/240
Power consumption, A	12
Dimensions: L x W x H, mm	2090 х 920 х 900
Weight, kg	270

The model Magnabend 2000 E has a bending beam length of 2000 mm and a clamping power of 9.0 tons.

Thanks to design, Magnabend electromagnetic bending machine makes incredible blanks: it produces products of the most unusual and complex configuration. The basis of this machine is a longitudinal electromagnet with a clamp strip made of steel and placed higher. Workpiece, in the process of work is fixed due to a powerful electromagnet between the two slats. The desired bend is formed by turning the bend bar (it is located in front of the machine and is attached to unusual hinges).

When working, the workpiece is fixed to the bending machine by an electromagnetic press with a force of 9.0 tons/meter. Bending with the help of Magnabend is carried out by turning the beam, fixed on special two-axle hinges. Force is applied only in the place of its creation; It does not need to be passed along the chain further - to the support elements that are behind the machine. Therefore, the clamping mechanism does not need the massive nature of the structures, hence the technique acquires a neat, small-sized appearance and produces sophisticated technology products. The ability of the clamping bar to pass through the required volume of magnetic flux dictates the parameters of its thickness. Profile blanks are obtained qualitatively even due to the same effort to fix. The bending machine is very wear-resistant (resource not less than 10 years), because friction of details is not involved at all.

Magnabend machine structure

Since the machine structure consists of unusual hinge loops in the form of a sphere located along the entire length of the folding rack, the Magnabend bending machine no longer needs a massive bending traverse to create the rigidity of the whole mechanism. So, the small size of the machine is preserved and its productivity is increasing.

On this machine there are no restrictions on the sheet feed - so called. full-speed machine. A precise and correct location of the part on the desktop is provided by brackets with sheet feed limiters.

Brackets with stops Bracket

The presence of a protractor helps to determine the bending angle in the manufactured product. Due to the comfortable corner stopper of the bending beam, the desired bending angle is set and the number of bending repeats that is necessary is carried out.

Protractor

The control panel (located on either side of the machine) and the pedal remote control helps to increase productivity, because the employee's hands are now free, and he can quickly mark the workpiece in the work area.

Due to the comfortable regulators that are located on either side of the clamping rod, you can set the desired bending radius for workpieces of different thicknesses.

The machine allows to create products of a difficult configuration, thanks to an open end structure. If you set benders in a straight line, you can perform an operation with a long bend.

The tool tray and the parts of the split beam are located next to the work table.

The Magnabend bending machine is equipped with a dual-mode electromagnet. The locking mode spends 30 percent of the working power, it starts after the location of the part in the work area. The operating mode is used when the bending traverse begins to move. When the bending is completed and the bending traverse is retracted to the initial position, the workpiece is automatically released. This scheme of actions is the key to increasing productivity and saving the worker's energy. The bending machine does not allow overloading the built-in protection. When overestimating the maximum possible capacity of the equipment, the clamping bars are easily attenuated. As a result, possible machine failure is almost impossible.

Types of profiles:

Types of products

You will find more complete and detailed information on the capabilities and operation of this sheet bending machine in the instructions at the link below:
https://mv-tools.com.ua/katalogy/Magnabend_2000Е-3200Е.pdf

Manufacturer: Australia