Rust converter, 400 ml

Rust converter, 400 ml

Anti-corrosion coating with rust-converting properties, stops the development of corrosion, converts corrosion into iron compounds and neutralizes it, ideal for use in hard-to-reach places where rust has formed.

Also protects in cracks and pores due to its high penetration depth. We recommend using a high-quality epoxy primer for a reliable protective layer. Can be puttied or painted over. Silicon-free and acid-free.

Instructions for use:
Before spraying, remove loose rust, grease, dirt and paintwork under which rust has formed. Thoroughly clean the surface from loose corrosion. Shake the can vigorously and spray 2-3 thin layers (from a distance of approximately 25-30 cm). Drying time between individual layers is 2 hours. After all layers have completely dried, apply the top coat.

Note:
Hardens at room temperature. After use, turn the can upside down and spray until the valve is empty. Only 1-component products should be used when painting.

Manufacturer: Germany