Blind strengthened rivets GOEBEL PREMIUM-LOCK

Blind strengthened rivets PREMIUM-LOCK - Ø 4.8 / 6.4 mm (aluminum, galvanized, stainless steel); 

Reinforced rivet PREMIUM-LOCK for thin sheet material. It is intended for sheet metal, including in combination of various types of materials (aluminum, steel, stainless steel, plastic). During installation, a strong fixation of the rod inside the rivet housing is ensured, due to incisions. Do not damage the connected parts. For high tensile and shear strength of the joint. The rivet is designed for heavy loads, high resistance to vibration, watertight (sealed). The strengthened rivet PREMIUM-LOCK, unlike the rivet GO-LOCK / M-LOCK, is perfect for thin sheet material.

• evenly formed closing head and a large bearing area provide high strength;
• good pressure on the face of riveting holes, even with noncircular ones;
• grooved mandrel offers more grip for the clamping jaws;
• extremely suitable for thin sheet material;
• the remainder of the mandrel is held captive in the shaft;
• remaining mandrel increases shear and tensile strength;
• highly resistant against vibrations;
• with a fi tting drill hole the connection is splash-proof;
• suitable for joining different combinations of materials;
• fast, easy and safe to use;
• easy to set up installation tools, no skills required.

• Automotive industry;
• Car body and vehicle manufacturing;
• Construction industry;
• Engineering and equipment manufacturing;
• General industry.

TESTED ACCORDING TO ISO14589

This ISO 14589 test includes the following items:
Shear strength
This is the force acting horizontally to the longitudinal axis that the rivet can withstand when loaded until the rivet joint fails. The shear strength (N = Newton) specified in this catalogue is a typical value determined in accordance with the test method ISO 14589 (2000).
Tensile strength
This is the force that the rivet can withstand in the direction of its longitudinal axis when loaded until the rivet joint fails. The tensile strength (N = Newton) specified in this catalogue is a typical value determined in accordance with the test method ISO 14589 (2000).
Principle of the mandrel pull-out test (before installation)
The test consists of axially loading the mandrel from the head side of the blind rivet until it is pulled out. Principle of the mandrel breaking load test The test consists of loading the mandrel, pulled out of the rivet body, in a test fixture with a tensile load until it breaks.
Principle of the head holding capacity test
The test consists of axially loading the mandrel from the head side of the installed blind rivet to a load that ensures the head is held. All details in Newtons, 1 kp = 9.80665 N (10 N) GOEBEL can provide an inspection report for each batch delivered. This procedure ensures that only tested products are delivered for safe use by customers.

Supplier: Germany